Welcome to the Eurodraw Wire Equipment Web Site

header photo

LATEST NEWS

EURODRAW ASSUME !

Eurodraw è alla ricerca delle seguenti figure da inserire nel proprio organico:

1. Specialista elettronico:

  • Familiarità con programmazione PLC Siemens
  • Redazione specifiche elettriche macchinari
  • Disponibilità anche a brevi trasferte all'estero
  • Lingua inglese indispensabile

2. Operai montatori  (2 posizioni disponibili)

  • Familiarità con la lettura del disegno meccanico
  • Familiarità con schemi pneumatici
  • Basi di inglese
  • Patentino muletto e saldatura

3. Operaio trasfertista  (2 posizioni disponibili)

  • Familiarità con la lettura del disegno meccanico
  • Familiarità con schemi pneumatici
  • Lingua inglese necessaria
  • Disponibilità anche a trasferte di alcune settimane
  • Minimo tre anni di esperienza richieste come montatore meccanico

4. Disegnatore meccanico

  • Familiarità con CAD 2D e 3 D - Solidworks
  • Familiarità con schemi pneumatici
  • Lingua inglese desiderata
  • Valutiamo anche candidature primo impiego.

SEDE LAVORO : Pogliano Milanese

Le candidature devono essere mandate a info@eurodraw.com

SMALL DIAMETER PC STRAND LINE

Please check out our new high speed machine designed for the production of small diameter PC strand.

Full details here.

 

0 comments

WPM Trading

WPM Trading FZE is the Eurodraw representative in the Middle East.

WPM Trading works in close cooperation with Eurodraw and can supply services for machinery consulting, machinery selection and sales, machinery spare parts and anything you may need in the steel wire business such as spools, galvanizing line sinkers, cold rolling line rollers etc...

WPM Trading is your local Middle East partner in the wire industry.

Contact:

web site: http://www.wpm-trading.com

e-mail: sales@wpm-trading.com

0 comments

51,2 METERS PER SECOND WIRE DRAWING LINE DELIVERED

Eurodraw just delivered to one of its customers a ultra high speed wire drawing line.

The drawing line is composed of a wire drawing machine 12 blocks and a special high speed spooler.

The new Eurodraw cooling system allows exceptional wire cooling hence the speed of the line could be increased to levels that were just unthinkable a few years ago.

The machine was successfully tested prior shipment to a speed of 51,2 m/sec. 

The test was made with 5,50 mm wire low carbon 1018 wire rod drawn down to a diameter of 1,30 mm in 12 dies and wound on a 2 ton spooler. Lubricant was calcium based in the first two dies and sodium based on the rest of the machine. Pressure dies were used on all blocks. The machine is equipped with the following features:

  • Rotating dies on every other block
  • Soap stirrers
  • Heavy duty horizontal spooler
  • OTO block on first position
  • Xcooling system on all blocks (New Eurodraw Pressurized cooling system with high heat exchange rate)
  • Air cooling on all blocks
0 comments

VIDEO OF TYRE CORD PLANT

See our latest video of a tyre cord plant that has been designed and supplied with equipment produced by Eurodraw Wire Equipment.

The supply included:

- initial wire rod preparation and wire drawing

- patenting and brass plating line

- wet drawing

- stranding equipment

- rewinding and palletizing equipment

- laboratory

- complete supply of basic engineering, know how and technology 

 

SEE OUR VIDEO HERE

0 comments

NEW 2018 catalogues

Our renewed 2018 catalogues are now available. Please send us a message and we will be pleased to send you a copy!

0 comments

NEW AVAILABLE WIRE DRAWING LINE

We have available a brand new wire drawing machine for immediate delivery.

Please see our dedicated page for this machine on our web site following this link.

 

 

0 comments

INVERTED COILERS

See our new video of the IC 900 inverted coiler. This machine allows to produce large coils of high carbon wire without twist.

The machine is particularly suitable for the production of large diameter spring wire.

See video on the Inverted coiler page.

 

0 comments

EXCEPTIONAL CONDITIONS USED WET DRAWING MACHINE AVAILABLE.

We have in stock two wet wire drawing machines with the following techncial specifications:

SEE PICTURES BY CLICKING THIS LINK

Number of passes: 25

Number of cones : 6

Wire grade: Low/High carbon steel wire, Brass wire.

Inlet wire diameter: 1.40 mm high carbon wire, 1,60 mm low carbon wire

Outlet wire diameters: from 0,50 to 0,08 mm

Maximum speed: 20 m/sec

One machine is inclusive of spooler for up to 460 mm spools, the other machine is without spooler but we can provice a new one within short time.

The machine has only 500 Hours on the clock and is in virtually new condition.

GCR Eurodraw brand

Please contact us for further details.

0 comments

KEMTECH is our new representative for the Indian market

Eurodraw Wire Equipment is happy to inform that since June 1st 2016, it has appointed Kemtech International Private ltd. as our exclusive agent for the Indiam market.  

Kemtech will cooperate with us in promoting our products and by offering a closer follow up in after sales service and customer assitance.

This partnership will allow our company to serve this promising market in the best conditions and to better serve all our existing customers in the area. 

http://www.kemtech.in/eurodraw.html

0 comments

View older posts »